RIGHT Submersible Pumps for Wastewater

This professionally designed pump is made of high quality stainless steel AISI 304. Double shaft seal prolongs pump service life and increases its reliability.

Submersible pumps can pump liquids with particles up to 35 mm in diameter.

• RIGHT submersible pumps feature similar functional and design characteristics, and differ only in terms of flow rate, head, weight, and  dimensions
• Pumped medium is either clean or contaminated water
• Max. temperature of pumped medium is 50°С
• Max. immersion depth is 10 m
• Impeller is centrifugal and of open type
• Outlet nozzle is G 1 1/2"

• Motor is asynchronous and has 2 poles
• Isolation class: F
• IP rating: IP 68 
• Frequency is 50 Hz
• Voltage: single-phase 230V ±10%, three phase 400В ±10%
• Installed automatic heating protection
• 3-phase versions require thermal protection to be installed independently
• Float switch is available upon request
• Power cable length is 10m; H07RN-F 3G1 type for 1-phase versions or H07RN-F 4G1 for 3-phase versions

• Pump housing is made of AISI 304 stainless steel
• Housing cover is made of AISI 304 stainless steel
• Electric motor shaft is made of AISI 303
• Impeller is made of AISI 304 stainless steel
• Mechanical seal: SIC/SIC/NBR at the pump side, graphite/ceramic/NBR at the motor side
• Oil bath liquid is Esso Marcol oil (180ml) 

• Designed for continuous operation
• Housing, impeller, and shaft are all made of stainless steel
• Double shaft seal in an oil bath
• Either fixed or temporary installation is available due to space saving design and small weight
• Maintenance-free shaft seal
• Overheating protection of electric motor
• Noiseless operation
• IP rating: IP 68

Overall Dimensions